In order to fulfill the basic functions of our service, the user hereby agrees to allow Xiaomi to collect, process and use personal information which shall include but not be limited to written threads, pictures, comments, replies in the Mi Community, and relevant data types listed in Xiaomi's Private Policy. By selecting "Agree", you agree to Xiaomi's Private Policy and Content Policy .
Agree

Tech

Tech Talks
Subscribed
Subscribe

[Other] Hover board: How does it work?

2017-11-17 02:01:41
1899 30

Hello Mi Fans How are You'll doing
Many of you know what a hoverboard is many have even maybe used it some may have not, but have you ever imagined how it works. How does it self balance? In this thread you will come to know how this works.
This Is how the board looks from inside(Below)


How Does the Self Balancing Board Move…

The Wheel Sensors: The wheels of the hoverboard house the electric motors themselves. They also contain a tilt and speed sensor. This detects the rpm (revolutions per minute) of the individual wheel, and sends it to the gyroscope and speed control boards, located inside the main body, right next to the wheels.


Gyroscope/Speed control board: The gyroscope and speed control boards receive the rpms(Revolution per minute) and tilt information from the sensor inside the wheels, and they, in turn, send it to the main logic board. When you calibrate your board, the gyroscopes are basically “zeroed”, as in, you’re telling the gyroscopes, “this is flat, and hence this is when the hoverboard’s tilt is at 0”.

Main Logic board: The logic board is the “brain” of your hoverboard, and it’s where the processor computes in real time the status of the board, the speed at which you’re travelling, and the relative speed and tilt of the individual wheels (because, for example, when you turn the two wheels have opposing tilts, and hence opposing rpms and motion). It also controls the power management of the board, and wether you are in“beginner mode” (thereby limiting the max speed of the board) or if the scooteris “locked”.


Battery: Battery packs for hoverboards are what keep everything powered. Without the hoverboard battery pack, it would not able to operate, balance, or move forward and backward.

So How does the Board Detect your movement?
This is most clever part of the board: the pressure pads sit on two switches each.
When you lean forward, the front switch is pushed down, and a little plastic “wall” slides in-between an infrared LED and an infrared sensor.

As long as the sensor detects the light, the logic board will “tell” the motors to be still. But when the light is interrupted (because of the switch being pushed down by your weight), the board tells the motor to spin in a particular direction.


So, for example, if you’re turning left, your foot activates the front right switch, making the right wheel spin forward, while your left foot activates the back left switch, making the left wheel spin backwards. It’s very clever.

Source: StreetSaw

Thank you for reading

Rate

Number of participants 2 Experience +20 Pack Reason

View Rating Log

2017-11-17 02:01:41
Favorites17 RateRate
Tech Talks
Tech Talk is simple and best way to represent latest tech news in short span of time.
717 Article Description     4860 Subscribers
Subscribed
Subscribe

Grandmaster Bunny

Ashoks | from Redmi 3S

#1

Thanks for sharing information
2017-11-17 02:34:16
nice explained, thanks for sharing
2017-11-17 02:34:20

Pro Bunny

syam ns | from Redmi 4

#3

nice information
2017-11-17 03:13:04

Advanced Bunny

1684589020 | from Redmi Note 4

#4

D rd xf gfghg jufdg hjui
2017-11-17 03:22:56

Advanced Bunny

1720446202 | from Redmi 4A

#5

nice information tqq
2017-11-17 03:25:22

Pro Bunny

syed1234 | from Redmi Note 4

#6

Nice information
2017-11-17 04:14:11

Master Bunny

1720376765 | from Redmi Note 4

#7

Great thread...thanks for sharing...
2017-11-17 05:13:40

MIUI Beta Tester

Asha@63. | from MIX

#8

Good news Thanks
2017-11-17 05:25:59

Pro Bunny

Yash keshari | from Redmi Note 4

#9

well explained.
2017-11-17 05:52:26

Rookie Bunny

1752613586 | from Redmi Note 4

#10

wow nice information
2017-11-17 05:55:27
please sign in to reply.
Sign In Sign Up

Rohan_ron

Master Bunny

  • Followers

    96

  • Threads

    24

  • Replies

    353

  • Points

    4532

3 Days Check-In
7 Days Check-In
21 Days Check-In
40 Days Check-In
70 Days Check-In
Sep-100 replies in a month
Nov-100 replies in a month
2 million registered members
Newbie Member
Techie Team Member
2018 New Year Medal
Mi Community Updater
Color Your Planet
The Motivator
Throwback With Mi 2018

Read moreGet new
Copyright©2016-2019 Xiaomi.com, All Rights Reserved
Content Policy
Quick Reply To Top Return to the list