In order to fulfill the basic functions of our service, the user hereby agrees to allow Xiaomi to collect, process and use personal information which shall include but not be limited to written threads, pictures, comments, replies in the Mi Community, and relevant data types listed in Xiaomi's Private Policy. By selecting "Agree", you agree to Xiaomi's Private Policy and Content Policy .
Agree

Tips & Tricks

[Tutorial] How To Create Bootable USB Without Any Software In Windows 10

2018-04-30 06:37:25
2347 32
•Today I am Share How Bootable USB by Command Prompt Method So Let's go..

It’s often very hectic to copy the entire DVD of windows 7 as ISO and buying a new DVD and then write the DVD to make the copy of Windows 7 bootable disk.Especially when one of your DVD is about to get scratch and again and again you are doing the same.Now a day everyone of us must having the USB flash drive of generally 2,4,8,16 GB.So here you can learn how to boot your computer from USB flash drive of minimum 4 GB.

Don’t worry i am not going to give you download link of any application that may or may not work with all type of ISO as i also faced such problem.You can make the windows 7 bootable from just few commands in the command prompt only.All you need is the ISO or all the files or copy of DVD of windows 7 and Administrator right in your system.
While there are many tools to make bootable USB drive there’s one provided by even Microsoft there’s a way to do the same without any software.All you need to do is fire up Command Prompt and follow some simple instructions.
Let’s take a look at it:

Create Bootable USB without any software on Windows 10:
*Insert your USB flash drive to your computer.
*Search for ‘cmd’ in Windows 10 from the taskbar, Command Prompt will appear.
*Alternatively you can also open the Command Prompt by pressing windows R at the same time and typing in ‘cmd’ in the‘Run’window and hitting enter.
*Right click on Command Prompt and select‘Run as Administrator’in case you have searched for cmd in the Windows 10 Taskbar.
*Once the Command Prompt window appears type diskpart and hit enter.
*Wait until the diskpart utility runs in another window.
In the new diskpart window type list disk and hit enter.It will show you all active disks on your computer.
         Most probably you will see two Disk types.
*Disk 0 for hard drive and*Disk 1 for your USB Flash Drive with its total capacity.Since we are going to work on to create bootable USB drive we will work with Disk 1

Type select disk 1 in the same windows and hit Enter.You will get a message‘Disk 1 is now the selected disk’.That means any further operation that you do will affect your disk 1 directly.
Type clean and hit Enter to remove all of the data in the USB drive.Clean command will format your bootable drive.You will get a message like‘Diskpart succeeded in cleaning the disk’.
Type create partition primary and hit Enter. You will get a message like Diskpart succeeded in creating the specified partition.
Type create partition primary and hit Enter. You will get a message like Diskpart succeeded in creating the specified partition.
Type select partition 1 and hit Enter.It will choose partition 1 for setting up it as an active partition.
Type active and hit Enter. It will activate the current partition.Type format fs=ntfs quick and hit Enter.This command will format your current partition as NTFS file system quickly.       Type exit and hit Enter.Exit command will close the Diskpart program.But do not close the command prompt Windows.

Copying files from an ISO image on your PC/DVD to USB manually:
Now all you need to do open the files inside the DVD or ISO file copy it and paste inside USB manually.This will make your USB drive bootable.
Copying files from a DVD to USB using CMD:
Let us assume that the USB drive is the G: drive and the DVD installer is located on drive E: And you also have inserted a DVD inside the DVD drive from where you want to copy the data to create a bootable USB drive.

By default Command Prompt’s active directory for Administrator permission is on C:WindowsSystem32> We will navigate Command Prompt to set on DVD (E:) as its active directory.Remember there should be a DVD inside DVD installer.

*Just type E: then hit Enter and then the active directory is changed to E.
*Type cd boot and hit Enter.Now the active directory is changed to E:boot>
*Type bootsect /nt60 g: and hit Enter.It will create the boot sector on G: drive (USB Flash drive).
*Type exit and hit Enter to close the Command Prompt.

Until this step we have been successfully able to create a bootable USB drive and the flash drive is ready to be used as a boot media.
To install Windows from a bootable USB drive we just need to copy the whole installation files contained on the DVD installer to the USB flash drive.
*To do this open the Command Prompt as in previous steps.
*Once the command prompt is open type copy e:*.*/s/e/f g:and then press Enter.Wait until all the files in the DVD installer are copied onto the flash drive.Please double check the drive letter of your USB and DVD.Here is the drive letter of the DVD drive that holds the Windows DVD'g is the drive letter that you assigned to the external USB Stick.

*Now bootable USB drive is ready to be used for installing Windows from the Flash drive and you’re done.
2018-04-30 06:37:25
Favorites67 RateRate

Semi Pro Bunny

Tech With ME | from Mi A1

#1

nice I will try
2018-04-30 09:55:58

Master Bunny

1797503451hi | from Redmi Note 4

#2

Nice information
2018-04-30 09:57:50

Master Bunny

Detroit | from Mi A1

#3

Informative article
2018-04-30 11:16:46

Semi Pro Bunny

Soheb Siddiqui | from Redmi Note 4

#4

Rufus software is also good and simple to use
2018-04-30 11:32:34

Read Only

aniket kapuriya | from Redmi Note 5 Pro

#5

great information
2018-04-30 11:49:29

Advanced Bunny

1716224569 | from Redmi Note 4

#6

Good good good good
2018-04-30 12:12:35

Rookie Bunny

1638760262 | from Redmi Note 4

#7

thanx for the information bro really very helpful
2018-04-30 12:16:43

Semi Pro Bunny

SSSDilip | from Redmi 4

#8

nice information
2018-04-30 13:37:59

Semi Pro Bunny

1690385883 | from Redmi 4A

#9

I will try


I will trying it . but I am not success.
2018-04-30 14:20:21

Master Bunny

Sagar Datere | from Redmi Note 5 Pro

#10

thanks for the details
2018-04-30 14:33:36
please sign in to reply.
Sign In Sign Up

!mvikash

Master Bunny

  • Followers

    13

  • Threads

    34

  • Replies

    783

  • Points

    6068

3 Days Check-In
7 Days Check-In
21 Days Check-In
2 million registered members
ThrowBackWithMiCommunity
2017 Xiaomi Annual Bill
Mi Community Updater
April Participation
The Motivator
MIUI 10
Throwback With Mi 2018

Read moreGet new
Copyright©2010-2020 Xiaomi.com, All Rights Reserved
Content Policy
Quick Reply To Top Return to the list