Greetings Mi Fans,
Facing any problem while updating your Mi Router 3C to the latest firmware? No worries!
In this guide, I’ll show how you can flash the firmware in Mi Router 3C Manually. All you have to do is follow this guide step-by-step. Let’s get started!
Visit http://miwifi.com/ or 192.168.31.1 or 192.168.1.2 (in the case of a repeater) and login via your Mi WiFI Password.
You’ll arrive at Mi Router’s Dashboard. Now, press the Settings button in the navigation area.
After arriving at Settings, press the Status button from the submenu and you’ll arrive at a screen shown below.
Press the Update Manually Button, browse to the firmware file and select it.
Press the Update now button, it will redirect you to the following screen.
At this step, all you have to do is wait. All your devices will get disconnected to Mi Router and an orange LED will start blinking during the update process. This process could take approximately 7 minutes.
Once the Router’s LED turns Blue, you can connect all your devices back to Mi Router and if you will refresh the above page, Mi Router will show the latest version under the Version heading.
It was easy, right? I’ve also attached the latest firmware file in this thread.I hope you find this guide useful. If you face any issues, do reply below and I’ll get back to you as soon as I can.
2017-06-20 07:36:16 UploadClick on the file to download the attachment
In order to fulfill the basic functions of our service, the user hereby agrees to allow Xiaomi to collect, process and use personal information which shall include but not be limited to written threads, pictures, comments, replies in the Mi Community, and relevant data types listed in Xiaomi's Private Policy. By selecting "Agree", you agree to Xiaomi's Private Policy and Content Policy .