In order to fulfill the basic functions of our service, the user hereby agrees to allow Xiaomi to collect, process and use personal information which shall include but not be limited to written threads, pictures, comments, replies in the Mi Community, and relevant data types listed in Xiaomi's Private Policy. By selecting "Agree", you agree to Xiaomi's Private Policy and Content Policy .

Mi A2

[Other] Mi A2 Teardown: Have a closer look inside the Picture Perfect Dual Camera Phone

2019-03-23 13:45:05
596 6
Hello Mi Fans,

Back in 2018 August 8, Xiaomi launched the Picture Perfect Dual Camera Phone, The Mi A2 as part of the Google's Android One Program. It is powered by a Snapdragon 660 processor. The Dual Camera Setup consists of a 12MP Primary Camera and a 20MP Secondary Camera. It sports a FHD+ 5.99inch display with Gorilla Glass 5 protection. It has the metal unibody design and a 3010mAh battery. Without waiting much Let's get start to the teardown process.

Caution: Disassembling a device on your own will void the Warranty. This teardown is done by professionals. If you want to do it, do it at your own risk.

Tools Required:
  • Spudgers
  • Suction Cup
  • Plastic Spudger Cross
  • Screwdrivers
  • Tweezers

Steps to disassemble

1) Switch Off the device.

2) Remove the Sim Adaptor.

3) Remove Two Bottom Screws.

4) Use Spudger Tool To Separate LCD Frame and Back Panel, slowly follow the gap and open the LCD Frame.

5) Remove Metal Frame Covering the Battery Connector, LCD Connector, Fingerprint and Motherboard to SUB Board Flex Connector.

6) Disconnect Battery Connector, LCD Connector using tweezers, 20MP front camera Flex Connectors, Motherboard to SUB Board Flex Connector, Fingerprint Sensor Connector.

7) Remove Motherboard Screws.

8) Disconnect Network Antenna Wire with the spudger.

9) Disconnect Rear Dual Camera Flex Connectors using tweezers.

10) Have a closer look to the SD660 AIE processor and Hynx Memory Module.

11) 20MP AI Powered Front Camera.

12) Rear LED Flash.

13) Remove all the screws holding the SUB Board.

14) Bottom Loud Speaker.

15) Detach the SUB Board strip, the Type-C Port and Mic are visible now.

16)  All parts except 3010mAh Battery are now removed.

Finally, we are done with the Teardown for Mi A2, Hope you liked it. Thankyou.

Source: All credits for this teardown goes to ESC Baig


Number of participants 1 Experience +10 Pack Reason

View Rating Log

2019-03-23 13:45:05
Favorites1 RateRate
Well explained
2019-03-23 14:02:45

Rookie Bunny

Achu007 | from app


Nice to see what's inside the camera centric phone?
2019-03-24 00:14:03

Master Bunny

jithin.jose506 Author | from app


Nice to see what's inside the camera centric phone?

hope you liked it
2019-03-24 00:15:35

Master Bunny

jithin.jose506 Author | from app


Well explained

thanks bro
2019-03-24 00:16:00

Rookie Bunny

5157690135 | from Redmi Note 5 Pro


very well explained
2019-03-24 01:05:53

thanks everyone
2019-05-20 14:54:43
please sign in to reply.
Sign In Sign Up


Master Bunny

  • Followers


  • Threads


  • Replies


  • Points


3 Days Check-In
7 Days Check-In
21 Days Check-In
40 Days Check-In
70 Days Check-In
10 Million Downloads
Message in a bottle
Throwback With Mi 2018
Xiaomi's 9th Birthday

Read moreGet new
Copyright©2016-2019, All Rights Reserved
Content Policy
Quick Reply To Top Return to the list