In order to fulfill the basic functions of our service, the user hereby agrees to allow Xiaomi to collect, process and use personal information which shall include but not be limited to written threads, pictures, comments, replies in the Mi Community, and relevant data types listed in Xiaomi's Private Policy. By selecting "Agree", you agree to Xiaomi's Private Policy and Content Policy .
Agree

Tech

[Discussion] 10 Common Audio Formats: Which One Should You Use?

2017-07-04 03:56:27
2506 17

Audio files come in all types and sizes. And while we may all be familiar with MP3, what about AAC, FLAC, OGG, or WMA? Why do so many standards exist? Which ones should you care about and which ones can you ignore?

It’s actually quite simple once you realize that all audio formats fall into three major categories. Once you know which category you want, all you have to do is pick the format within that category that best suits your needs.

1. Uncompressed Audio Formats
Uncompressed audio is exactly what it sounds like: real sound waves that have been captured and converted to digital format without any further processing. As a result, uncompressed audio files tend to be the most accurate but take up a LOT of disk space — about 34 MB per minute for 24-bit 96 KHz stereo.

PCM
PCM stands for Pulse-Code Modulation, a digital representation of raw analog audio signals. Analog sounds exist as waveforms, and in order to convert a waveform into digital bits, the sound must be sampled and recorded at certain intervals (or pulses).
PCM is the most common audio format used in CDs and DVDs. There is a subtype of PCM called Linear Pulse-Code Modulation, where samples are taken at linear intervals. LPCM is the most common form of PCM, which is why the two terms are almost interchangeable at this point.

WAV
WAV stands for Waveform Audio File Format (also called Audio for Windows at some point but not anymore). It’s a standard that was developed by Microsoft and IBM back in 1991.
Most WAV files contain uncompressed audio in PCM format. The WAV file is just a wrapper for the PCM encoding, making it more suitable for use on Windows systems. However, Mac systems can usually open WAV files without any issues.

AIFF
AIFF stands for Audio Interchange File Format. Similar to how Microsoft and IBM developed WAV for Windows, AIFF is a format that was developed by Apple for Mac systems back in 1988.

Most AIFF files contain uncompressed audio in PCM format. The AIFF file is just a wrapper for the PCM encoding, making it more suitable for use on Mac systems. However, Windows systems can usually open AIFF files without any issues.

2. Lossy Compressed Audio Formats
Lossy compression is a form of compression that loses data during the compression process. In the context of audio, that means sacrificing quality and fidelity for file size. The good news is that, in most cases, you won’t be able to hear the difference.
However, if the audio gets compressed too much or too often, you’ll start hearing artifacts and other weirdnesses that become more and more noticeable.

MP3
MP3 stands for MPEG-1 Audio Layer 3. It was released back in 1993 and quickly exploded in popularity, eventually becoming the most popular audio format in the world for music files. There’s a reason why we have “MP3 players” but not “OGG players”…
The main pursuit of MP3 is to cut out all of the sound data that exists beyond the hearing range of most normal people and to reduce the quality of sounds that aren’t as easy to hear, and then to compress all other audio data as efficiently as possible.

Nearly every digital device in the world with audio playback can read and play MP3 files, whether we’re talking about PCs, Macs, Androids, iPhones, Smart TVs, or whatever else. When you need universal, MP3 will never let you down.

AAC
AAC stands for Advanced Audio Coding. It was developed in 1997 as the successor to MP3, and while it did catch on as a popular format to use, it never really overtook MP3 as the most popular for everyday music and recording.
The compression algorithm used by AAC is much more advanced and technical than MP3, so when you compare a particular recording in MP3 and AAC formats at the same bitrate, the AAC one will generally have better sound quality.

Again, even though MP3 is more of a household format, AAC is widely used today. In fact, it’s the standard audio compression method used by YouTube, Android, iOS, iTunes, later Nintendo portables, and later PlayStations.

OGG (Vorbis)
OGG doesn’t stand for anything. Actually, it’s not even a compression format. OGG is a multimedia container that can hold all kinds of compression formats, but is most commonly used to hold Vorbis files — hence why these audio files are called Ogg Vorbis files.
Vorbis was first released in 2000 and grew in popularity due to two reasons: first, it adheres to the principles of open source software, and second, it performs significantly better than most other lossy compression formats (i.e. produces a smaller file size for equivalent audio quality).

WMA
WMA stands for Windows Media Audio. It was first released in 1999 and has gone through several evolutions since then, all while keeping the same WMA name and extension. As you might expect, it’s a proprietary format created by Microsoft.
Not unlike AAC and OGG, WMA was meant to address some of the flaws in the MP3 compression method — and as such, WMA’s approach to compression is pretty similar to AAC and OGG. In other words, in terms of objective quality, WMA is better than MP3.

3. Lossless Compressed Audio Formats
On the other side of the coin is lossless compression, which is a method that reduces file size without any loss in quality between the original source file and the resulting file. The downside is that lossless compression isn’t as efficient as lossy compression, meaning equivalent files can be 2x to 5x larger.

This is obviously much harder to do well, but there are a few good formats for this. And don’t confuse lossless compression with high-resolution audio (which is most likely a scam anyway).

FLAC
FLAC stands for Free Lossless Audio Codec. A bit on the nose maybe, but it has quickly become one of the most popular lossless formats available since its introduction in 2001.
What’s nice is that FLAC can compress an original source file by up to 60% without losing a single bit of data. What’s even nicer is that FLAC is an open source and royalty-free format rather than a proprietary one, so it doesn’t impose any intellectual property constraints.

ALAC
ALAC stands for Apple Lossless Audio Codec. It was developed and launched in 2004 as a proprietary format but eventually became open source and royalty-free in 2011. ALAC is sometimes referred to as Apple Lossless.
While ALAC is good, it’s slightly less efficient than FLAC when it comes to compression. However, Apple users don’t really have a choice between the two because iTunes and iOS both provide native support for ALAC and no support at all for FLAC.

WMA
WMA stands for Windows Media Audio. We covered it above in the lossy compression section, but we mention it here because there’s a lossless alternative called WMA Lossless that uses the same extension. Confusing, I know.
The biggest issue with WMA Lossless is the limited hardware support. If you want lossless audio across multiple devices, you should stick with FLAC unless all of your devices are of the Windows variety.

So Which Format Should You Use?
For most people, the decision is actually pretty easy:
If you’re capturing and editing raw audio, use an uncompressed format. This way you’re working with the truest quality of audio possible. When you’re done, you can export to a compressed format.

If you’re listening to music and want faithful audio representation, use lossless audio compression. This is why audiophiles always scramble for FLAC albums over MP3 albums. Note that you’ll need more storage space for these.

If you’re okay with “good enough” music quality, if your audio file doesn’t have any music, or if you need to conserve disk space, use lossy audio compression. Most people actually can’t hear the difference between lossy and lossless compression.

For those who want utmost quality in their music playback, note that high-quality audio files won’t matter if your playback device can’t faithfully recreate those sounds. Meaning, you need to have good quality speakers or good quality headphones!

What kind of audio formats do you use most often? Share with us in the comments!
Thank You
(Source)

Rate

Number of participants 3 Experience +11 Pack Reason

View Rating Log

2017-07-04 03:56:27
Favorites13 RateRate
Very useful and valuable informatin. All about audio is here.
2017-07-04 04:16:03

Rookie Bunny

1611955179 | from app

#2

good one bro
2017-07-04 04:16:25

Pro Bunny

Prabhjot hundal | from MI MAX

#4

very nice and great information
2017-07-04 05:12:17

Pro Bunny

Prabhjot hundal | from MI MAX

#5

very nice and great information
2017-07-04 05:12:39

Master Bunny

DGP 007 | from Redmi Note 3

#6

Good information
2017-07-04 05:44:54

Read Only

Maqbool Safiya | from Redmi Note 4

#7

Thanks for sharing this
2017-07-04 06:04:35

Pro Bunny

satyano1 | from MI 5

#8

nice information brother
2017-07-04 06:09:43
Mp3 is best
2017-07-04 07:24:38

Semi Pro Bunny

Tinkualreadyexist | from Redmi Note 4

#10

which is best?
2017-07-04 07:39:31
please sign in to reply.
Sign In Sign Up

Apolle

Master Bunny

  • Followers

    46

  • Threads

    260

  • Replies

    652

  • Points

    6960

100 threads in a Month
3 Days Check-In
7 Days Check-In
21 Days Check-In
40 Days Check-In
June-100 replies in a month
July-100 replies in a month
Aug-100 replies in a month
71st Independence Day
MIUI 7th Anniversary
2 million registered members
Newbie Member
Throwback With Mi 2018

Read moreGet new
Copyright©2016-2019 Xiaomi.com, All Rights Reserved
Content Policy
Quick Reply To Top Return to the list