In order to fulfill the basic functions of our service, the user hereby agrees to allow Xiaomi to collect, process and use personal information which shall include but not be limited to written threads, pictures, comments, replies in the Mi Community, and relevant data types listed in Xiaomi's Private Policy. By selecting "Agree", you agree to Xiaomi's Private Policy and Content Policy .
Agree

Tech

[Discussion] All You Need To Know About Different Types Of Touchscreen Technology!

2018-04-05 12:52:43
8121 133

Hello Mi Fans,
I am back with another interesting topic " All You Need To Know About Different Types Of Touchscreen Technology!" I will be explaining you details about  it and many more interesting things will be shared in this thread!

HIGHLIGHTS :

  • Resistive touchscreen technology is considered the most affordable of the lot to implement, and uses quite a simple principle. It consists of two transparent and flexible layers which are electrically resistive, separated by a thin space where electric current is passed.
  • capacitive touch technology is a widely used and very versatile technology based on capacitive coupling, which takes human body capacitance as input. The difference between the dielectric of air and  the dielectric of fingers or a stylus is detected by the touchscreen, which then registers input.
  • Surface acoustic wave touch technology is a very interesting technology that employs transducers to register touch input. Two transducers, one each for sending and receiving, are placed along the X and Y axis of a screen’s glass plate. Also added are reflectors, which reflect electrical signals sent from one transducer to another.
  • Infrared LED and photodetector pairs placed around the edges of the screen. These beams are projected in vertical and horizontal patterns over the screen. Any disruption in the path of the beams is detected by the photodetectors, which translates into the location of the touch event. The best part is that infrared touch technology works perfectly well with different types of inputs, like fingers, styli, gloves and more.


Touchscreens are electronic displays-cum-input devices used in a wide variety of devices today. Over the past few years, touchscreens went from a technological fantasy to something so widespread that it’s now considered standard. Go back a few decades, and touchscreens would be looked at as nothing short of magic. Yet here we are, using them in our daily lives. It’s quite wondrous to think that technology is advancing so rapidly that in a couple of years.

There are basically four types of touchscreen technology, used depending on cost or application. They are:

  • Resistive Touch Technology
  • Capacitive Touch Technology
  • Surface Acoustic Wave Touch Technology
  • Infrared Touch Technology

Resistive Touch Technology:-

Resistive touchscreen technology is considered the most affordable of the lot to implement, and uses quite a simple principle. It consists of two transparent and flexible layers which are electrically resistive, separated by a thin space where electric current is passed. These two layers are then protected by a scratch resistant glass layer, which functions as the actual conduit for whatever is being used to press it, like fingers or a stylus. When the device is on, an electric current continuously runs through this thin space, and any contact caused by touching the top layer to the bottom layer registers a location where contact has been established, which is then converted into input via software and/or drivers.


Precision is taken care of by horizontal and vertical lines that run through these layers, thus pinpointing the exact location, something like a coordinate system, on an X and Y axis. During operation, when the two layers are pressed, they act like a pair of voltage dividers, acting on one axis at a time. First, a voltage gradient is applied to the top layer, and the second layer calculates the distance along the top layer, measuring the X-axis. The voltage gradient is then applied to the bottom layer to ascertain the Y-axis distance, with respect to the top layer.

Resistive touchscreens are usually used in commercial applications like supermarkets, hospitals, restaurants and more because it’s a more resilient technology. Since it also works with a stylus or gloves, it is more desirable in certain situations, even though its not as bright and accurate as capacitive touch. Poorer contrasts and the need to apply pressure to register touch, specially in mobile applications resulted in capacitive touchscreens being used more widely, although you can still find tablets and mobile phones that use it. It is also possible to create resistive touchscreens that ignore fingers or gloves and work only with a stylus, so it does have specific uses.

Capacitive Touch Technology:-

Using the principle of capacitive sensing, capacitive touch technology is a widely used and very versatile technology based on capacitive coupling, which takes human body capacitance as input. The difference between the dielectric of air and  the dielectric of fingers or a stylus is detected by the touchscreen, which then registers input. Capacitive sensing is also used in other sensors like proximity, humidity, acceleration and much more. It’s even used to create music, in an instrument called a theremin.


In this type of touchscreen technology, an electrically charged layer is placed on the glass panel, which loses some of its charge when a conductor such as a human finger touches it. The loss of charge is then measured by circuits at each corner of the screen, which calculates the relative distance and difference in charges by a reference charge, thus determining the location of of input. This information is then relayed to the software/driver that translates it into touch input for the device. This is called surface capacitance, and is used in low cost applications like touchscreen help kiosks, point of sale units, vending machines and such. It isn’t too sensitive or accurate, but comes with a lower cost than the other type of capacitive touch technology.

Surface Acoustic Wave Touch Technology:-

Surface acoustic wave touch technology is a very interesting technology that employs transducers to register touch input. Two transducers, one each for sending and receiving, are placed along the X and Y axis of a screen’s glass plate. Also added are reflectors, which reflect electrical signals sent from one transducer to another. When a touch event occurs on any part of the screen, the receiving transducer is able to understand that waves have been blocked or absorbed by an external source, and pinpoints the location of the disturbance, thus registering input information which is relayed to the software/driver.


Since there are no metallic parts used in this type of touchscreen technology, there is absolutely no loss in clarity of picture, or more specifially, 100% light is transmitted from the screen, compared to about 90% for capacitive touchscreens, and 75% for resistive touchscreens. It’s used in detailed graphics applications, where there has to be no loss in quality. However, it is far more expensive than other types of touchscreen technologies, and is thus used only in very specific situations.

Infrared Touch Technology:-


Finally, we have infrared touch technology, which uses an array of infrared LED and photodetector pairs placed around the edges of the screen. These beams are projected in vertical and horizontal patterns over the screen. Any disruption in the path of the beams is detected by the photodetectors, which translates into the location of the touch event. The best part is that infrared touch technology works perfectly well with different types of inputs, like fingers, styli, gloves and more. Unlike resistive touchscreens which depend on pressure for the two layers to touch together and capacitive touchscreens which depend on changes of dielectric, infrared touch doesn’t need any special input, but is more susceptible to dirt and dust. They are used in point of sale systems and some outdoor applications, and are usually not used in screens that are curved, because of parallax error.

So Mi Fans, this is a information about "All You Need To Know About Different Types Of Touchscreen Technology! ". if you need more information  please click on source link given below.

Thanks For Reading

Rate

Number of participants 1 Experience +1 Pack Reason

View Rating Log

2018-04-05 12:52:43
Favorites144 RateRate
Excellent article!
2018-04-06 05:14:46


Tech - Moderator
Mi FC Trivandrum - President

Master Bunny

SHUBHANK RAJAK Author | from Redmi Note 3

#2

Hari Sankar G
Excellent article!

thank you brother...
2018-04-06 05:21:57
Invalid floor, the posts have been deleted #3

Advanced Bunny

Prince❣️ | from Redmi Note 4

#4

loved.....
2018-04-06 10:41:47
Invalid floor, the posts have been deleted #5

Master Bunny

meetgour | from Redmi Y1

#6

Awesome!!!!
2018-04-06 13:49:40

Rookie Bunny

Apgulati | from Redmi Note 4

#7

nyc redmi phones in india
2018-04-06 14:22:34

Master Bunny

shahkaran16 | from app

#8

Nice Information
2018-04-06 14:32:12
Nice, thanks for sharing
2018-04-07 02:06:10

Pro Bunny

RanaSohna | from MI 4W

#10

great information
2018-04-07 02:15:42
Jeet
Keep S MI LING
please sign in to reply.
Sign In Sign Up

SHUBHANK RAJAK

Master Bunny

  • Followers

    90

  • Threads

    70

  • Replies

    362

  • Points

    8854

3 Days Check-In
7 Days Check-In
21 Days Check-In
40 Days Check-In
70 Days Check-In
100 Days Check-In
Lucky Draw No.
Pokemon Go!
App Review
1 million members
Xiaomi 7th Birthday
New Home
Mi Campus Superstar Candidate
1st Anniversary
2 million registered members
Newbie Member
Diwali
Techie Team Member
2018 New Year Medal
ThrowBackWithMiCommunity
MIUI Instagram
2017 Xiaomi Annual Bill
Mi Community Updater
Color Your Planet
Color Our Planet Game
The Motivator
MIUI 10
Golden Mi Bunny
MIUI Subscriber
Mi A2
MIUI 8th Anniversary
Throwback With Mi 2018

Read moreGet new
Copyright©2010-2020 Xiaomi.com, All Rights Reserved
Content Policy
Quick Reply To Top Return to the list